Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Olympia Chimney Flue Liner Replacement: The Manassas Owner’s Guide
An Olympia Chimney flue liner replacement in Manassas typically runs $1,800 to $3,400 installed, depending on liner diameter, height, and whether the old liner comes out in one piece or fights you the whole way. We stock Olympia Chimney-compatible stainless steel liners on the truck in standard sizes, so most swaps happen in a single visit. Homeowners usually find out the hard way: a camera inspection after a smoky fireplace, or rust flakes accumulating in the firebox where the old liner is quietly separating at the seams.
If you’re seeing rust, hearing debris fall when the wind hits the flue, or your chimney has started drafting like a tired sigh, the liner isn’t waiting for a convenient season. Here’s what we’ve learned replacing them across Manassas, from Historic Old Town colonials to 90s builds off Liberia Avenue.
Which Olympia Chimney Models This Applies To
Olympia Chimney makes a broad line of stainless steel chimney liners, and we work with the rigid and flexible series, including their 316L alloy liners sized for wood, pellet, and gas appliances. The big compatibility gotcha we run into in Manassas homes: Olympia’s pre-insulated flexible liners have a specific outer diameter that will not always fit through an existing clay tile flue without breaking tiles out. We measure the throat, the damper opening, and the total run before ordering a liner that actually fits the house, not the catalog.
OEM Olympia liners are well-made; the 316L stainless holds up against the humid Virginia summers and the freeze-thaw cycles that punish everything on the exterior. But aftermarket equivalents from DuraFlex and Gelco are often identical in alloy and gauge at a better price, and we’ll say so on the written estimate. Level Two Chimney Manassas is an independent service provider, not affiliated with Olympia Chimney. That matters: we’re not obligated to sell you the most expensive version of a fix. We quote the part that fits, in writing, before we touch the chimney.
Signs Your Olympia Chimney Flue Liner Replacement Is Failing

- Rust stains in the firebox or smoke chamber. This is the most common first sign we find in Manassas homes. Water vapor condenses inside the flue, the liner corrodes at the seams, and rust bleeds down onto the brick. That rust is not cosmetic; it’s a liner losing structural integrity.
- Pieces of metal flue liner in the fireplace. Thin, sharp fragments near the damper usually mean the liner has separated at a seam or corroded through. Once a liner starts shedding, the exhaust path is no longer continuous. This warrants a camera inspection the same week you notice it.
- Smoke rolling back into the room. A cracked or collapsed liner constricts the flue, kills draft, and pushes smoke backward. If it happens even once on a calm evening, it’s not the wind. It’s the flue.
- Chimney odors that won’t quit, even when the fireplace is cold. Flue gases and creosote smells escaping through gaps in the liner are not just unpleasant. They mean the liner is not containing the byproducts of combustion. This is a ventilation failure, not an air freshener problem.
- White staining or efflorescence on the exterior chimney. In Manassas, this can signal water getting behind the liner system and pushing through the masonry. The liner may still look intact from the top, but the moisture pattern tells a different story inside.
Corrine Halstead, who runs our Manassas operation, has pulled more than her share of forty-year-old liners out of chimneys in this area. Her read is simple: if the camera shows more than two feet of separated seam, the liner is done. We’ll show you the footage.
Before
AfterReplacement Cost & What’s Included
The installed price range for an Olympia Chimney-compatible flue liner replacement in Manassas is $1,800 to $3,400. Here’s what moves the number:
- Liner diameter and length: A 6-inch liner for a wood stove is the most affordable; an 8-inch or 10-inch liner for a larger fireplace or furnace costs more because of the alloy weight and the labor to pull it through.
- Single-story versus two-story: A taller flue needs more liner, more ladder time, more care at the crown. It all adds up.
- Whether the old liner comes out clean: If the old terra cotta tiles crumble or the existing liner is wedged in place, we’ve got more demolition labor. We will not bury that in markup; the written estimate breaks it out.
- Insulation wrap: For wood-burning appliances, the liner should be insulated. We include that on most installs because it speeds draft and keeps creosote from condensing. It’s a couple hundred dollars well spent, and we’ll say why on the line item.
What the price includes: camera-scan inspection before and after (NFPA 211 Level 2), the liner and connection hardware, insulation where applicable, installation, a written scope, and a documented photo record when we’re done. The 365-Day Done Right Promise applies to every liner install: if it’s not done right, we make it right. We also keep the Haven Standard’s Clause 1 promise on every job: written price, written scope, written warranty before anyone starts work. No exceptions, no call-for-a-quote games.
DIY or Call Us?

Let’s be honest upfront: flue liner replacement is not a weekend homeowner job. Getting a liner down a chimney safely means working at height, frequently removing the chimney cap and crown (and sometimes breaking out the old clay tiles), and making connections that must not leak exhaust gas into your walls. A liner that fits but isn’t clamped correctly is worse than no liner, because it knows how to hide its leak until it matters. This is one of the few jobs we’ll flatly say: hire a trained professional.
What you can do safely right now: shine a flashlight up the flue from the firebox and look for rust streaks, visible gaps, or debris. Take photos on your phone. If you see anything that looks like separation or flaking, call us at (571) 946-2300 with the photos in hand. We’ll schedule a camera scan and tell you exactly what the liner looks like from the inside. You’ll have the footage, and we’ll write the price down before anything gets scheduled.
FAQs
In Manassas’s climate, a quality 316L stainless liner typically lasts 15 to 25 years when properly insulated and swept annually. Humidity and freeze-thaw cycles are the silent killers here, so we recommend a camera-scan inspection every two years for any liner beyond its tenth birthday. To schedule one, call (571) 946-2300.
Sometimes, but very rarely once a liner has begun separating at the seams. Small pinhole leaks near the top connection can occasionally be patched, but the patch is a stopgap. If the camera shows structural separation across multiple feet of liner, we will not quote a patch; we’ll quote the replacement and explain why. You deserve the honest answer before you spend a dollar.
A straightforward Olympia Chimney-compatible liner replacement on a single-story home in Manassas is usually a one-day job. Two-story liners, tile removal, or crown repairs can stretch it to a day and a half. We’ll give you a written time estimate when we write the price.
We stock common sizes of 316L flexible and rigid liner in 6-inch, 8-inch, and some 10-inch diameters on the truck, alongside matching connectors and caps. Olympia Chimney-specific OEM parts we may need to order, but in most cases a quality equivalent in the same alloy and gauge is available immediately. We’ll show you both options on the estimate and let you choose. Call (571) 946-2300 for a free in-home estimate.
Written by Corrine Halstead, Owner, Level Two Chimney Manassas at Level Two Chimney Manassas, serving Manassas and nearby areas.





Before
After
Before
After