Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Chimney Liner & Rebuild in Manassas: What to Know First
Olympia Chimney liner and rebuild work in Manassas typically runs $1,800 to $6,400 depending on flue length, liner material, and whether we’re doing a partial rebuild or taking the stack down to the roofline. Most Olympia jobs take one to two days on site, and every one starts with a camera inspection and a written price before any work begins. As an independent Olympia Chimney service provider, we’re not tied to a manufacturer’s sales targets, so the recommendation is whatever the camera shows, not whatever moves inventory.
This page is for homeowners in Manassas who own an Olympia Chimney product and need straight answers about liner replacement or rebuild work. If you’ve been told you need a new liner and want to see the evidence before you pay for it, call (571) 946-2300 and we’ll schedule a Level 2 camera inspection.
How Olympia Chimney Products Fail - and How We Fix Them
Olympia Chimney manufactures solid, mid-market chimney components, but like every brand, they have known failure points. Here’s what we see on Manassas rooftops and what we do about it.
- Olympia galvanized chase covers rust through at the corners. The factory covers on many Olympia prefab systems are galvanized steel, and in Manassas summers, the humidity settles into the seams and eats them from the inside. Water gets into the chase, the insulation saturates, and the liner starts corroding invisibly behind the wall. We replace the cover with stainless, inspect what the water touched, and only rebuild what actually failed.
- Olympia clay tile liners crack at the first cold snap after installation when the mortar bed wasn’t struck properly. We find vertical hairline cracks running top to bottom through individual flue tiles on older Olympia masonry fireplaces. Heat expansion does the rest. Once a crack opens, flue gases find the gap. Depending on what the camera shows, we’ll either install a stainless liner sized to the existing flue or rebuild the damaged section before relining.
- Olympia dampers seize if the pivot pins weren’t greased at install. A seized damper isn’t just annoying; it means the chimney never fully closes, and Manassas winter winds push cold air down the flue all season. Corrine’s note from years of inspections: a forty-year-old Olympia damper that hasn’t moved in a decade tells us more about the installer than the manufacturer. We free or replace the damper when we reline, so the new system actually drafts the way it should.
- Olympia prefab flue sections separate at the locking joints when the chase settles. Manassas clay soil expands and contracts through the year, and prefab chimney chases built on slab foundations move enough to pop the flue section locks. The camera sees the offset immediately: the flue no longer lines up straight, and in a worst case, the sections separate entirely. We remove the damaged sections, re-align the flue, and lock everything down before it becomes a chimney fire waiting for fuel.
- Olympia flashing on the high side of the chimney fails before the low side, every time. Water pools where the roof meets the chimney on the uphill face, and that’s where we see the first rust-through on Olympia flashing, especially on the steeper rooflines in Manassas’s older neighborhoods. When we rebuild, we reflash the high side with a proper cricket and ice-and-water shield underneath. It costs a little more up front and it stops the leak that probably started the conversation.
Our Olympia Chimney Chimney Liner & Rebuild Process
Every Olympia liner or rebuild job in Manassas follows the same steps, and you’ll have paperwork from each one.
- 1
We run a Level 2 camera inspection. The camera goes down the flue from the top and up from the firebox. You see the footage when we’re done, not a summary.
- 2
We write the findings down. Measurements, photos, and a plain-English description of what’s failing. Clause 4 of the Haven Standard requires a documented photo record on every visit, and we’ve done that since 2009.
- 3
We price the job in writing before any work starts. OEM Olympia parts where they matter, quality aftermarket (DuraFlex, HeatShield, Gelco) where they’re a better value, and every line item separated so you can see what you’re paying for.
- 4
We do the work. Old liner out, flue prepped, new stainless liner or rebuild sections in, everything sealed and tested. You get a text when the crew is on the way and a named tech assigned to the job.
- 5
We test and document. The camera goes back down the finished flue. You get the before and after photos, the final scope of work, and the written warranty.
- 6
We stand behind it. Every job carries the 365-Day Done Right Promise. If it’s not done right, we make it right, no argument.
BeforeAfterWhat Olympia Chimney Chimney Liner & Rebuild Costs in Manassas
Here’s what we’re quoting on Olympia jobs in Manassas right now, and what moves the number.
- Stainless steel liner replacement (single flue): $1,800 to $3,200, depending on flue height and access
- Flexible liner install (Olympia masonry fireplace): $1,600 to $2,800
- Partial chimney rebuild (above the roofline): $2,500 to $4,500
- Full chimney rebuild (down to the firebox): $4,000 to $6,400
- Liner repair (sectional replacement, not full reline): $800 to $1,400
What drives the price: how much flue has to come out, whether the crown and chase cover need replacing, and whether scaffolding is required on a steep Manassas roofline. What doesn’t drive the price: commission. Our techs aren’t paid on what they sell, so the number stays honest. Call (571) 946-2300 for a free estimate with a camera inspection, not a guess.
Why Manassas Homeowners Call Level Two Chimney Manassas for Olympia Chimney Work
Because we show you the evidence before we ask for a dollar. We’ve inspected and cleaned over 38,000 chimneys since 2009, and every one of them got a written price before work started. That’s not a marketing line; it’s Haven Standard Clause 1: have it in writing.
We service Olympia Chimney products and we also work with DuraFlex, HeatShield, and Gelco components, so if a cross-brand part is the better fix, we’ll tell you. Our techs are background-checked and uniformed, the license number is on the page, and a real person answers the phone 24/7. If you have a competitor’s written quote, bring it in; we’ll give you a free second opinion on paper. Corrine Halstead runs the Manassas operation, and she still calls homeowners herself when the camera finds something that can’t wait.
FAQs
It depends entirely on what the camera shows. Isolated cracks in clay tile or a small section of separated prefab flue can often be repaired with a sectional replacement or a stainless liner insert, without pulling the whole system apart. But if the liner has multiple failure points or the chase has water damage behind the walls, a full reline or rebuild is usually the cheaper long-term fix. We’ll show you the footage and give you a written recommendation either way; nothing is recommended without camera evidence you can see for yourself. Call (571) 946-2300 for an exact answer based on your chimney.
As an independent Olympia Chimney service provider, we’re not authorized by Olympia, so we can’t act as a manufacturer warranty claim. What we can do is the work properly so the liner doesn’t fail again, and back it with our own 365-Day Done Right Promise on labor. If a manufacturer defect is the root cause, we’ll document it thoroughly enough to support your claim with Olympus directly. We also source OEM parts where they matter, so the components match the original system.
Most Olympia liner replacements take one day on site. A partial rebuild above the roofline runs one to two days, and a full rebuild down to the firebox takes two to three. The written estimate includes a start date and time window before you commit, and you’ll get a text when the crew is on the way the morning of the job.
You don’t, until someone puts a camera down the flue. The camera already told me; I’m just writing it down for you. A Level 2 inspection shows us whether what you have is Class III creosote that needs mechanical removal, or a failed liner that needs replacement, or both. You’ll see the footage yourself, and the written scope will match the photos exactly. If the chimney only needs a sweep, that’s what we’ll recommend; we don’t sell rebuilds on a flue that just needs cleaning.
The short answer: the damage doesn’t pause while you decide. A cracked liner keeps venting flue gases into places they shouldn’t be, and in Manassas, freeze-thaw cycles widen masonry cracks every winter. The longer answer depends on your specific chimney. If the camera shows a failing liner, we’ll tell you plainly whether it’s a repair-now situation or something that can safely wait until spring, and we’ll put that in writing either way. Call (571) 946-2300 and Corrine or a senior tech will walk you through what we’re seeing.
Written by Corrine Halstead, Owner, Level Two Chimney Manassas at Level Two Chimney Manassas, serving Manassas and nearby areas.